Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Problems with door closing.

in Forum: C6 Problems


Already a Member?
Login
Not yet a Member?
Register for Free!

Problems with door closing. (1/13)
 1/14/07 12:00pm
vette9999
Standard Member
Send Private Message

White Lake, MI - USA

Vette(s):
2006 Lemans Blue Coupe


Joined: 6/25/2006
Posts: 13

I have had problems with the driver's door not completely closing when the weather is cold. This has happened even after having been driven for an hour in cold weather. I'll get out of the car, close the door as normal and the door will not close all the way. It does make a THUD sound. It almost sounds like it hit the locking mechanism. The door is closed but still open about an inch. From here, it will not just pull open, I must activate the lock in the door handle. Sometimes it takes 4 tries to close properly.
Dave
PS It is not the seat belt in the way. That is a separate problem.
Our Sponsors help support C6VR
Problems with door closing. (2/13)
 1/14/07 2:19pm
Paragon75Stingray
Standard Member
Send Private Message

White Plains, MD - USA

Vette(s):
75 white


Joined: 8/10/2003
Posts: 155

What year is your Vette? Convertible, Coupe or Z06?

Scot
Problems with door closing. (3/13)
 1/17/07 6:48pm
apple
Standard Member
Send Private Message

Duncanville, TX - USA

Vette(s):
'74 coupe '85 coupe


Joined: 10/2/2006
Posts: 226

Could be a weatherstrip issue, or possibly the wiring loom in the front of the door. Sounds like a trip to the dealer... |sad|

______________

1974 Coupe, Multiple NCRS 'Top Flight' 1985 Coupe

See my cars & toys!

Problems with door closing. (4/13)
 1/17/07 7:04pm
vette9999
Standard Member
Send Private Message

White Lake, MI - USA

Vette(s):
2006 Lemans Blue Coupe


Joined: 6/25/2006
Posts: 13

It's a 2006 coupe.
Problems with door closing. (5/13)
 4/7/07 9:47am
vette9999
Standard Member
Send Private Message

White Lake, MI - USA

Vette(s):
2006 Lemans Blue Coupe


Joined: 6/25/2006
Posts: 13

Took the car into the dealer and intially they looked at me like I was a bit strange, however it turns out there was indeed a service bulletin out for the exact problem I described. They ordered and replaced some new part(s)per the bulletin. See what happens next winter.
Problems with door closing. (6/13)
 4/7/07 8:22pm
apple
Standard Member
Send Private Message

Duncanville, TX - USA

Vette(s):
'74 coupe '85 coupe


Joined: 10/2/2006
Posts: 226

Did you happen to get the number of the TSB(bulletin)?
What "part(s)" does it require to repair the problem?
Hope this is not a wide-spread issue on the C6 cars('06)...might be a lot of upset owners if it is.
Please keep us informed. |thumb|

______________

1974 Coupe, Multiple NCRS 'Top Flight' 1985 Coupe

See my cars & toys!

Problems with door closing. (7/13)
 2/17/08 6:18pm
rsbertsch
Standard Member
Send Private Message


Vette(s):
'07 coupe - velocity yellow, Z51 and just about everything else except transparent roof panel.


Joined: 7/15/2007
Posts: 6

My driver's door started doing the same thing a few weeks ago. the car is a C6/Z51 coupe. I opened and closed the door slowly while sitting in the seat. It felt like the door hinge was letting the door drop slightly when opened and would slightly lift the door while closing the door. The lift and drop felt like is was occurring just as the forward part of the door cleared the threshold.

This weekend the door/window was really acting up. Sitting in the seat I opened and closed the door and may have found the problem. The window did not lower to break the seal (electrically lowers about 1/2 inch when the door open button is depressed). This made a catch when the door was opened and a rather noticeable noise when the door was closed. This is going to be one of those problems that will haunt me for sure, because, today the window started working correctly again. |ohwell| One of those problems that will not be present when it goes in for service.
Problems with door closing. (8/13)
 2/19/08 11:04am
vette9999
Standard Member
Send Private Message

White Lake, MI - USA

Vette(s):
2006 Lemans Blue Coupe


Joined: 6/25/2006
Posts: 13

Even after the dealer's "fix", I am still having the same problem with the door not closing only when ~ 35 degrees or colder. The condition is the same as described by the previous post where is "feels" like the door dropped about a half inch, however the automatic window lowere/raising works fine. I find that I have to slam the door several times before it will close. This will happen either after sitting all night, or after a 35 mile ride home from work.
I'll be back at the dealer soon.
This is a 2006 coupe. |sad|
Problems with door closing. (9/13)
 2/19/08 6:18pm
erniecorvettec6
Standard Member
Moderator
Send Private Message

LAKEWOOD, CA - USA

Vette(s):
2005, C-6 Auto, polish wheels, Z-51


Joined: 11/16/2003
Posts: 641

Bummer |eek|
Problems with door closing. (10/13)
 3/5/08 7:54am
Flyin'Hawaiian
Standard Member
Send Private Message


Vette(s):
2005 Corvette coupe


Joined: 1/20/2008
Posts: 4

Man, reading all these posts about the door not closing, I can relate. I thought I was maybe closing it differently which caused this. Same symptom; feels as if the door is hinky by a half inch. And, as with other owners with this problem, it's intermittent. In Hawaii they call these little come-and-go buggahs "Menehunes", Pronounced Men Eh Hoo Nee. Only bit me twice in 30,000 miles. Hope that menehune caught a flight back to da rock. Knock on plastic.
Re: Problems with door closing. (11/13)
 9/9/16 11:12am
Dawgman01
Standard Member
Send Private Message

Winston, GA - USA

Vette(s):
1994 Convertible 2013 GS


Joined: 8/24/2016
Posts: 1

Got a 2013 GS. Had Corvette guy say that it was a broken hinge location on door. Going to pick it up now. Will see if the 'new door' replacement will fix. This was just  purchased as a Certified veh. and the dealer made it good. Only 8400 miles. We will see.
Re: Problems with door closing. (12/13)
 9/20/16 8:28am
NEWbie
Former Member

Send Private Message


Vette(s):
2010 Jetstream Blue coupe


Joined: 11/20/2010
Posts: 10

Try to perform the "power window initialize" procedure found in the owner's manual.  I have a 2010 and it is on page 3-18.
Re: Problems with door closing. (13/13)
 10/4/16 10:14am
jrhall55
Standard Member
Send Private Message

Brawley, CA - USA

Vette(s):
2000 C5 convertible, and a 2005 C6 Coupe


Joined: 10/4/2012
Posts: 23

Hi, My 2005 started doing that, I usually find that if I'm doing something different, it causes a problem. Mine was at the start of summer. I had been leaving both windows down. Just a couple of inches. for the heat. The first time was in the garage, opened the passenger door and went to close it and there goes the thud. Didn't think much of it at the time, small clinch, no big deal. I used the key fob to lock and unlock a couple of times. Then it was more and more a problem, happened at the movies, in San diego. So, I thought the only thing different was leaving the windows down just a little. So I reprogramed the doors for the window to go down and up just a bit. AND started leaving the windows up. Have not had the problem since. Not once.  But, that's my story, and it worked for me.

______________
Our Sponsors help support C6VR